Most building teams order a laser scan for one reason. The architect needs existing-conditions drawings. The contractor needs to know if the new ductwork will fit. The owner needs accurate square footage for a lease. Then the scan gets filed away, and six months later someone else on the same building pays for another site visit to measure something that was already captured. The point cloud from one scan holds far more than one deliverable. Every wall, column, pipe, slab and ceiling is recorded as measured points, so the same data can serve the designer, the builder, the leasing team and the facility manager across the building’s whole life. This guide follows a building through five stages and shows what the scan delivers at each one: before design, during design and coordination, during construction, at leasing and handover, and in day-to-day operations. If you only want the complete list, see our 3D Laser Scanning Deliverables page.
What can you do with one 3D laser scan? One scan of a building produces a measured point cloud. That dataset can become 2D CAD drawings, Revit models, clash and deviation reports, floor flatness checks, BOMA area reports, virtual tours, videos and a digital twin for operations. That’s more than 60 deliverables, which can be ordered now or years later.
What does a 3D laser scan actually capture?
A laser scanner measures the distance to every surface it can see by timing pulses of laser light. It spins as it measures, recording millions of points, each with an X, Y and Z position. Most scanners also take full-color 360° photos at each position, so every point can carry its true color.
One setup sees only what’s in its line of sight, so the scanner moves from room to room. Software then lines up all those setups into one dataset. That combined, color-mapped result is the registered point cloud, and every deliverable in this guide starts there.
How accurate is the data?
It depends on the scanner and the distance. Arrival 3D uses the Leica RTC360 for most building work. Leica rates its range accuracy at 1.9 mm at 10 m, 2.9 mm at 20 m and 5.3 mm at 40 m. For large floor areas we add NavVis VLX mobile scanning, which captures while walking. For the full picture, read How Accurate Is 3D Laser Scanning?
Master list: 61 deliverables in 8 groups
The Capture column says how each deliverable is produced:
- Scan: one building or site scan visit
- Drone: a drone LiDAR flight
- Repeat: a second scan or monitoring visits
- Object: close-range object scanning
- Matterport: a camera device, not a laser scanner
On site means a page on arrival3d.com names the deliverable. Confirm means competitors or industry guides list it, but Arrival’s site doesn’t yet.
| # | Deliverable | What it is | Typical formats | Main user | Capture | On site |
|---|---|---|---|---|---|---|
| Scan data & imagery | ||||||
| 1 | Registered point cloud | All scans merged into one measured 3D dataset | E57, RCP/RCS, LAS/LAZ, PTS/PTX | Everyone | Scan | Yes |
| 2 | Georeferenced point cloud | Point cloud tied to survey coordinates | E57, LAS | Surveyors, civil | Scan | Yes |
| 3 | Classified point cloud | Points sorted into ground, vegetation, buildings | LAS/LAZ | Civil, GIS | Drone | Yes |
| 4 | 360° panoramic imagery | Full-color spherical photos at each scan position | JPG | Everyone | Scan | Yes |
| 5 | Virtual tour / web viewer | Browser walkthrough with measuring tools | TruView LGS/LGSX, web link | Owners, FM | Scan | Yes |
| 6 | Scan & QA report | Registration accuracy and coverage summary | Design leads, QA | Scan | Yes | |
| 7 | Photo evidence package | Geotagged photos cross-referenced to the cloud | JPG, PDF | Insurers, FM | Scan | Yes |
| 2D drawings | ||||||
| 8 | Floor plans | Dimensioned plans of every level | DWG, DXF, PDF, RVT | Architects, FM | Scan | Yes |
| 9 | Reflected ceiling plans | Ceiling grid, lights, diffusers, heights | DWG, PDF | Architects, MEP | Scan | Yes |
| 10 | Interior elevations | Wall faces with openings and fixtures | DWG, PDF | Architects, interiors | Scan | Yes |
| 11 | Exterior elevations | Facades with openings and materials | DWG, PDF | Architects, envelope | Scan | Yes |
| 12 | Building sections | Vertical cuts through the building | DWG, PDF | Architects, structural | Scan | Yes |
| 13 | Details & isometric drawings | Close-up construction details, isometric views | DWG, PDF | Engineers, fabricators | Scan | Yes |
| 14 | Site plans | Site layout, topographic and structural site plans | DWG, PDF | Civil, architects | Scan | Yes |
| 15 | Roof plans | Roof layout, equipment, drainage | DWG, PDF | Roofing, MEP | Scan | Confirm |
| 16 | MEP as-built drawings | Mechanical, electrical and plumbing layouts | DWG, PDF | MEP engineers | Scan | Yes |
| 17 | Emergency floor plans | Plans for safety planning and responders | PDF, DWG | Safety, FM | Scan | Yes |
| 18 | Floor contour maps | Elevation contours across a slab | PDF, DWG | Contractors | Scan | Yes |
| 19 | Updated P&IDs | Piping diagrams corrected to field conditions | DWG, PDF | Plant engineers | Scan | Yes |
| 20 | Schematic floor plans | Quick plans from a Matterport capture | PDF, JPG | Real estate, FM | Matterport | Yes |
| 21 | 2D drawing overlay | Scan compared against an existing drawing | PDF, DXF/DWG | QA, engineers | Scan | Yes |
| 3D models | ||||||
| 22 | Revit architectural model | Walls, floors, doors, windows, roofs (LOD 100–500) | RVT | Architects | Scan | Yes |
| 23 | Revit structural model | Columns, beams, slabs, framing | RVT | Structural engineers | Scan | Yes |
| 24 | Revit MEP model | Ducts, pipes, conduit, equipment | RVT | MEP engineers | Scan | Yes |
| 25 | IFC model | Open BIM exchange model | IFC | Any BIM platform | Scan | Yes |
| 26 | Navisworks coordination model | Model plus cloud for coordination | NWD, NWC | GCs, VDC | Scan | Yes |
| 27 | Parametric CAD model | Solid model for design and reverse engineering | STEP, IGES, SolidWorks | Manufacturers, industrial | Scan | Yes |
| 28 | Plant / piping model | 3D piping and equipment model | PDMS/E3D, CAD | Plant engineers | Scan | Yes |
| 29 | 3D mesh model | Triangulated surface of the scan | OBJ, STL, FBX | Visualization, heritage | Scan | Yes |
| 30 | NURBS surface model | Smooth mathematical surface (for example, a floor) | CAD | Engineers | Scan | Yes |
| 31 | 3D renderings | Presentation images of the model | JPG, PNG | Marketing, owners | Scan | Yes |
| 32 | Simulation-ready model | Geometry prepared for FEA or CFD | STEP, mesh | Engineers | Object | Yes |
| Analysis & reports | ||||||
| 33 | Clash detection report | Conflicts between design and existing conditions | NWD, PDF | GCs, MEP | Scan | Yes |
| 34 | As-built vs design report | Built work compared with the design model | GCs, owners | Scan | Yes | |
| 35 | Deviation color map | Heat map of out-of-tolerance areas | PDF, image | QA, structural | Scan | Yes |
| 36 | Floor flatness (FF/FL) report | Flatness and levelness per ASTM E1155 | Concrete contractors | Scan | Yes | |
| 37 | Deformation / settlement survey | Deflection, settlement and tilt over time | PDF, cloud | Structural engineers | Repeat | Yes |
| 38 | Volume calculations | Volumes of spaces, tanks, stockpiles | PDF, Excel | Owners, civil | Scan | Yes |
| 39 | Dimensional / GD&T inspection report | Part measured against CAD, with a dimension table | PDF, Excel | Manufacturers | Object | Yes |
| 40 | Tank inspection report | Tank shape and condition checks | Oil & gas, terminals | Scan | Yes | |
| 41 | Structural steel shape analysis | Identifies steel member sizes from the cloud | PDF, model | Structural engineers | Scan | Yes |
| 42 | BOMA area report | Measured areas to BOMA standards | PDF, Excel | Leasing, owners | Scan | Yes |
| 43 | Building condition assessment | Findings, severity and cost per finding | Owners, insurers | Scan | Yes | |
| 44 | Anomaly register | Spreadsheet of findings, ready to import into a CMMS | Excel, CSV | FM | Scan | Yes |
| 45 | Remediation priority schedule | Findings ranked into urgency tiers | Owners, capital planning | Scan | Yes | |
| 46 | Change detection / lifecycle monitoring | Scan-to-scan comparison over time | PDF, cloud | FM, structural | Repeat | Yes |
| Site & aerial | ||||||
| 47 | Topographic & contour map | Terrain shape and contours | DWG, PDF | Civil | Drone | Yes |
| 48 | Digital terrain model (DTM) | Bare-earth elevation surface | Surface file | Civil, earthworks | Drone | Yes |
| 49 | Digital surface model (DSM) | Surface including buildings and trees | Raster | Planning | Drone | Yes |
| 50 | Orthophoto / orthomosaic | Distortion-free aerial image to scale | GeoTIFF | Civil, GIS | Drone | Yes |
| 51 | Edge & vector lines | Curbs, breaklines, edges extracted as lines | DWG | Civil | Drone | Yes |
| Video & visualization | ||||||
| 52 | Fly-through video | Animated path through the point cloud | Video | Marketing, owners | Scan | Yes |
| 53 | Orbit video | Animated orbit around a building or site | Video | Marketing | Scan | Yes |
| 54 | Exploded 3D animation | Part assemblies shown pulled apart | Video | Manufacturers | Object | Yes |
| Facility operations | ||||||
| 55 | Online digital twin | Hosted model plus imagery plus data | Web | FM, owners | Scan | Yes |
| 56 | Asset tagging | Equipment tagged in 3D with documents and data | Web, RVT | FM | Scan | Yes |
| 57 | CMMS-ready asset data | Model data prepared for maintenance systems | Excel, RVT | FM | Scan | Yes |
| 58 | Wayfinding & escape routes | Routes shown inside the online twin | Web | Safety, FM | Scan | Yes |
| 59 | COBie handover data | Standard asset handover spreadsheet | XLSX | Owners, FM | Scan | Confirm |
| 60 | Space / room data inventory | Room names, uses and areas for space planning | Excel | Space planners | Scan | Confirm |
Point cloud, mesh or model: what’s the difference?
The point cloud is the raw measurement. A mesh joins the points into a continuous surface, which is good for visuals and 3D printing. A BIM model rebuilds the building as intelligent objects (walls, doors, ducts) that designers can edit and schedule. You can get all three from the same scan.
What format does it come in?
Usually E57 for sharing and archiving, plus RCP/RCS for Autodesk software. Survey and GIS teams get LAS or LAZ. → 3D Laser Scan File Formats Explained
What Arrival 3D already offers
The deliverables are spread across 13 service pages, and no single page brings them together. That’s the gap this blog fills. Here’s where each group is documented, so the blog can link to the right page:
| Group | Arrival 3D pages that name it |
|---|---|
| Point clouds, formats, BOMA, mesh, Navisworks | 3D Laser Scanning, Point Cloud Services |
| 2D drawings, emergency plans, floor contours, volumes, steel shape analysis | As-Built Services |
| MEP drawings, MEP models, clash detection | MEP & Above-Ceiling Scanning |
| Piping (PDMS/E3D) models, tank inspections, deformation tracking | Industrial 3D Laser Scanning |
| FF/FL report (ASTM E1155), deviation maps, NURBS surface | Floor Flatness |
| GD&T reports, deviation maps, dimension tables, 2D overlays | 3D Inspection Services |
| Condition reports, anomaly register, remediation schedule, change detection | Building Condition Assessment |
| Online twin, measurements, information points, wayfinding | Digital Twin |
| Classified clouds, DTM, DSM, contours, orthophotos, vector lines | Drone/UAV Scanning |
| Reverse-engineered CAD, simulation models, manufacturing drawings | Large Object Scanning |
| Fly-through and orbit videos | Fly-Through & Orbit Videos |
| Schematic plans, 3D renderings, IFC | Matterport Scanning |
| Asset tagging, CMMS-ready data | Facility Management, 3D Laser Scanning |



