- Laser Scanning Services
- Case Studies
- Contact Us
Capture your facility with incredible speed and accuracy and receive a CAD model.
When planning and engineering for multi-million dollar projects such as a large building renovation, it is critical that things go right. 3D scanning up front allows engineers to draw up precise plans and drawings that minimize conflicts during construction. The scan serves as an invaluable resource for many interested parties.
A plant in the oil and gas industry will change over time, that is without question. This results in the P&ID drawings of record ultimately becoming out of date. 3D laser scanning provides a dual benefit of not only providing a way to update P&ID’s but also provides a truly accurate as-built reference 3D model of the plant. We feel that an as-built 3D model combined with smart P&ID’s is the way of the future.
Scanning an airplane is a fantastic way to capture it’s shape. We can scan interior and exterior and convert it into a CAD model or STL mesh depending on your needs. From small single seaters to airliners, we are the best at aircraft 3D scanning and would be delighted to scan an aircraft for your company.
You may have a pump that you need to lower into a channel, and you want to see if it will fit before lowering it in and getting stuck. Or perhaps you have a large vault door that hasn’t been opened in years, and you want to know if it will scrape the concrete. 3D scanning can answer these questions so you can proceed with confidence.
Many power plants have outdated as-built drawings. 3D scanning provides a way to obtain updated drawings in the form of 3D CAD models of structural steel, ducts, equipment and piping. Armed with accurate models, your engineers can route new designs around existing objects, avoiding potential clashes and interferences during new construction.
When a processing plant adds a new product line, there is new piping and equipment that needs to be installed. With careful planning and the as-built drawings obtained from doing 3D laser scanning, the new piping designs can be engineered for precise fit, minimizing installation delays due to unforeseen conflicts.
3D laser scanning in Miami can capture the exterior or interior of a sea-going vessel. Any sized boat, ship or vessel can be scanned. For smaller boats (depending on location) this can be done in a day. The scan can be turned into 2D drawings for use by a naval architect, or into 3D solid models for various types of analysis.
Wind Turbines can be thoroughly scanned to analyze to identify any dents that may be present, and map out their location and depth. Scans can also be used to analyze the tower has a whole, and determine whether it has been structurally compromised after a failure.